- Home
- Search
New UW Electrical Safety Manual
Environmental Health & Safety (EH&S) published the new UW Electrical Safety Manual that establishes the requirements and best practices for University personnel conducting work on…
October is Biosafety Month: Schedule a spa day for your lab
October is National Biosafety Month, a time to strengthen and reevaluate biosafety practices in the lab.
Environmental Health & Safety (EH&S) encourages you to set aside some time for…
Loading Dock Safety Focus Sheet
The Loading Dock Safety Focus Sheet helps raise awareness of safety hazards near loading docks and provides guidance for safely operating around these areas.
Energized Electrical Work Plan and Permit
Use the Energized Electrical Work Plan and Permit template to document work under the following conditions:
When energized electrical work will be performed within the restricted approach…
Job Safety Plan and Briefing Checklist
The Job Safety Plan and Briefing Checklist must be completed before starting electrical work.
Refer to the UW Electrical Safety Manual for more information.
Custom Electrical Equipment Field Evaluation Form
Electrical equipment must be inspected and documented on the Custom Electrical Equipment Field Evaluation Form.
Refer to the UW Electrical Safety Manual for more information.…
Approach Distances to Exposed Energized Parts
The Approach Distances to Exposed Energized Parts describes the limited approach boundary, restricted approach boundary, and arc flash protection boundary.
Refer to the UW Electrical Safety…
Electrical Safety Manual Review Documentation
The Electrical Safety Manual Review Documentation is used to document personnel have read the UW Electrical Safety Manual.
PPE Inspection, Maintenance and Care Guidance
Personnel working in areas where there are potential electrical hazards are required to wear personal protective equipment (PPE) that protects against electrical hazards.
Follow the PPE Inspection,…
Prepare for new rules for methylene chloride
The U. S. Environmental Protection Agency (EPA) published a new rule for methylene chloride (also known as dichloromethane) for worker safety and public and environmental protection. The…
EH&S assists with regulatory permits for biological samples
Environmental Health & Safety (EH&S) has noticed an increase in regulatory inspections and audits related to permits for biological samples. EH&S Biological Safety is available to…
Sharps Safety Tools and Resources Presentation
The Sharps Safety Tools and Resources Presentation recommends safer sharps devices, PPE and other tools to reduce the risk of sharps injuries.
Visit the Sharps Safety page for more information.
Sharp Safety Devices Poster
The Sharp Safety Devices Poster recommends safer sharps devices and other tools to reduce the risk of sharps injuries.
Visit the Sharps Safety page for more information.
Alert: New Rule for Methylene Chloride
University units that use methylene chloride in products such as degreasers, paint strippers, adhesive removers, solvent welding products, or plastic bonding agents may be impacted by a new…
EH&S move to Gateway building
Most Environmental Health & Safety teams relocated to the new Gateway building above the Sound Transit Link light rail station on Brooklyn Avenue NE between NE 45th and 43rd …
Sharps Safety
Environmental Health & Safety (EH&S) is committed to working with University personnel to reduce the risk of accidents and injuries before, during, and after procedures involving sharps. The…
EH&S Annual Report FY24
The EH&S Annual Report FY24 summarizes the work of Environmental Health & Safety (EH&S) during fiscal year 2024.
Directions to EHS
View directions, parking, and public transit options for arriving at UW Environmental Health & Safety main office.
Crane Operator Assessment Form
University units use the Crane Operator Assessment Form to document an individual employee's ability to operate/inspect overhead cranes and hoists and/or inspect rigging and rig…
Rigging Equipment Inspection Checklist
This Rigging Equipment Inspection Checklist includes inspection requirements for all sling types (i.e., wire rope, alloy steel chain, metal mesh, natural and synthetic fiber rope, and…