All construction projects and air pollutant sources at the University must comply with the University’s Air Operating Permit requirements and all related policies and regulations. Environmental Health & Safety (EH&S) provides guidance, consultation, regulatory oversight, and assistance with environmental quality compliance and permits.
View the Air Operating Permit issued to the University on the Puget Sound Clean Air Agency website.
Permitted air pollutant sources
The University has several permitted air pollutant sources related to research and general campus operations. Permitted equipment includes industrial boilers, emergency diesel generators, and paint spray booths, among others.
New air polluting equipment
If a University group or department wants to install and operate new air pollution emitting equipment (e.g., gas-fired kiln, coffee roaster, paint spray booth, etc.) contact UW Environmental Health & Safety to determine whether the equipment will need an air permit.
Existing air polluting equipment
If you are altering, modifying, or removing a permitted air pollutant source, please contact EH&S and the UW Facilities Environmental Engineer before any work is done. Altering, modifying, or removing existing equipment may require prior notification to the Puget Sound Clean Air Agency.
- Contact the UW Facilities Environmental Engineer to find out your equipment is a permitted air pollutant source.
- Contact the UW Facilities Environmental Engineer if you are bringing new equipment to a University location that may be an air pollutant source.
Construction projects
Project managers should refer to the recommended guidelines (below) to ensure compliance with air quality regulations and permits before, during, and after any construction or maintenance project.
Note: Ethylene oxide and chlorine dioxide sterilization systems emit hazardous air pollutants and are not permitted on any UW campus.
- Verify whether the Air Operating Permit will affect your project or if your project will affect the Air Operating Permit by contacting the UW Facilities Environmental Engineer.
- Contact the UW Facilities Regulated Materials Office to evaluate the potential of regulated building materials existing on your project site. Note that approval from the Regulated Materials Office is required before the commencement of any capital project.
- Review contractor and subcontractor contract language with the Regulated Materials Office. Contractors and subcontractors must handle and regulated building materials according to the UW protocol.
- Work with the contractor or subcontractor to develop a dust event form if needed.
- Keep proper records of any potential air emissions events or regulated building material events. (Contact the UW Facilities Environmental Engineer with questions.)
- Check in regularly with EH&S and UW Facilities and at key moments during the project.
- Notify the UW Facilities Environmental Engineer and EH&S whenever there is a suspected regulated building material disturbance.
Provide the UW Facilities Environmental Engineer with copies of any documentation for any deviation events.
Continue to work with EH&S and UW Facilities if your project resulted in a Deviation Report, Notice of Violation, or Civil Penalty.
Ozone-depleting substances
Federal regulations direct the use of ozone-depleting substances. Refrigerant gases, widely-used on campus, are categorized as ozone-depleting substances and must be managed accordingly.
The UW Facilities Refrigeration Shop ensures that all refrigerators, freezers, air conditioners and cooling units on campus are well-maintained. When they are removed from service, any ozone-depleting substances are either recycled or incinerated as waste so they do not destroy stratospheric ozone.
Notification
If you use a contractor to work on air conditioning or refrigeration equipment, or if you purchase and install new equipment, please notify the UW Facilities Services Refrigeration Shop Supervisor at careteam@uw.edu or call 206.685.1900.
More information on ozone-depleting substances can be found on the EPA website.
Services available
EH&S provides the following services:
- Guidance, consultation, regulatory oversight, and assistance with environmental quality compliance and permits
- Assistance with complying with the UW Air Operating Permit and managing ozone-depleting substances, including refrigerants
Contact UW Facilities regarding the following services:
- Determine if a project will impact (or be impacted by) the University’s Air Operating Permit
- Evaluate a project site to determine if regulated building materials exist
- Review contracts for regulated building materials language
- Guidance on recordkeeping of events, including dust, air emissions, regulated building materials and deviation events
- Assistance with violations and penalties
More information
The Clean Air Act of 1970 gave the U.S. Environmental Protection Agency (EPA) authority to regulate air pollutants, including the protection of stratospheric ozone. The Washington State Department of Ecology and the Puget Sound Clean Air Agency are authorized by the EPA to regulate air pollution emitting equipment at all three UW campuses. The UW in Seattle is considered a Title V Source and retains an Air Operating Permit (AOP) issued by the Puget Sound Clean Air Agency.
Read University of Washington Administrative Policy Statement 11.3 Pollution Control for more information.
UW Facilities engineering contact
Jecca Canet, Environmental Engineer, UW Facilities Engineering Services
Box 352165
Mobile: 562.787.9543
Email: jgcanet@uw.edu